How to Add Your Own Flash Head to set.a.light 3D Studio

set.a.light 3D Studio is a great software for creating lighting setups for photography and video projects. It comes with a variety of built-in flash heads from different manufacturers, but if you have a flash head that is not included in the software, you can add it manually using the following steps:

1. Find the specifications of your flash head: To add your own flash head, you need to know the specifications of the unit. This includes the maximum power output, flash duration, and the diameter of the reflector.

2. Open set.a.light 3D Studio and click on the "Flash Head" tab on the right-hand side of the screen.

3. Click on the "Add new flash head" button located at the bottom of the flash head list.

4. Enter the name of your flash head: In the window that pops up, enter the name of your flash head in the "Name" field.

5. Enter the specifications of your flash head: In the "Power" field, enter the maximum power output of your flash head in watt-seconds (Ws). In the "Duration" field, enter the flash duration in seconds (s). In the "Diameter" field, enter the diameter of the reflector in centimeters (cm).

6. Add an image: If you have an image of your flash head, you can add it by clicking on the "Select image" button and browsing for the file on your computer.

7. Save your new flash head: Click on the "OK" button to save your new flash head to the software.

8. Use your new flash head: You can now find your new flash head in the list of available flash heads in the software. Simply select it and add it to your lighting setup like you would with any other flash head.

That's it! By following these steps, you can add your own flash head to set.a.light 3D Studio and create custom lighting setups for your photography and video projects.