Openai/693c9f31-ecc0-8002-b134-64bcac79dd59

This conversation was exported from ChatGPT

gpt-5-1

User: How to program this

How to program this

Assistant: You’re looking at a Honeywell W7751 / XL50-series style Building Manager keypad often used with Excel/Delta/BMS panels.

You’re looking at a Honeywell W7751 / XL50-series style Building Manager keypad (often used with Excel/Delta/BMS panels). These older Honeywell front-end controllers all program the same way — through MENU → REVIEW/PROGRAM → change values → SAVE. Here’s the clear step-by-step process to read and program it using the keys shown in your picture.

✅ HOW TO PROGRAM THIS HONEYwell CONTROLLER

BUTTON IDENTIFICATION (what the keys do)

• MENU → Access programming menus
• NEXT / PREV (Up/Down arrows) → Move between menu items
• TAP (Left/Right) → Move between items on a line
• + / – → Change values (setpoints, times, etc.)
• FAST → Speeds up +/– changes
• PROGRAM → Enter programming mode
• RUN → Return to normal operation
• REVIEW → Look at all parameter values without changing
• BYPASS → Temporary override (occupied mode, etc.)

🔧 ENTER PROGRAM MODE

1. Press PROGRAM (sometimes asks for a code—usually 0000 or not required on older models).
2. Screen will show the first editable item.

📋 NAVIGATE THROUGH PARAMETERS

Use these keys:

• MENU → cycle through categories (Schedules, Setpoints, Outputs, Inputs, Limits, etc.)
• NEXT / PREV → move between points within a category
• TAP (side arrows) → move across options on one line

✏️ CHANGE A VALUE

1. Navigate to the parameter (example: OCC SCHEDULE, COOL SETPOINT, HEAT SETPOINT, FAN MODE).
2. Use + / – to change the value.
3. Hold FAST while pressing +/– if you need large changes.
4. Changes save automatically when you exit the point.

🕑 TO PROGRAM A SCHEDULE

1. Press PROGRAM
2. Press MENU until you see SCHED / OCC / TIME
3. Use NEXT to choose the day (MON, TUE… or ALL)
4. Use TAP → to move to the start time
5. Use + / – to change the time
6. Tap again to change stop time
7. Repeat for all days
8. Press RUN to exit

🌡️ TO CHANGE SETPOINTS

1. PROGRAM
2. MENU → SETPOINTS
3. NEXT → choose HEAT, COOL, DAT LIMIT, etc.
4. Adjust with +/–
5. RUN to exit

⚠️ TO VIEW ALARMS

1. Press REVIEW
2. Use NEXT/PREV
3. To clear an alarm, many of these require: - Fix the issue - Then press CLEAR

🚀 If you want, I can walk you through the exact programming for:

✔ Schedules ✔ Heating/cooling setpoints ✔ Occupancy override ✔ Resetting alarms ✔ Changing time/date ✔ Reviewing IO points

Just tell me what you need to program on this specific unit and I’ll give exact steps for that screen.