How to Age Wood with Baking Soda

Aging wood with baking soda is a popular DIY technique that can give new wood a weathered, rustic appearance. Here are the steps to age wood with baking soda:

Materials: - Baking soda - Warm water - Paintbrush or spray bottle - Steel wool or sandpaper

Steps:

1. Create a baking soda solution by mixing 1 tablespoon of baking soda with 1 cup of warm water. Stir until the baking soda is completely dissolved.

2. Clean the wood surface to remove any dirt or debris.

3. Apply the baking soda solution to the wood surface using a paintbrush or spray bottle. Make sure to apply it evenly and cover all areas of the wood.

4. Let the solution dry on the wood for at least an hour.

5. After the solution has dried, use a piece of steel wool or sandpaper to lightly sand the wood. This will remove some of the soft wood fibers and create a more textured, weathered look.

6. Repeat steps 3-5 as many times as necessary to achieve the desired level of aging.

Note: The amount of baking soda and water you use will depend on the size of the wood surface you're working with. If you're working with a large surface area, you may need to mix more solution.

Also, keep in mind that this technique may not work as well on wood that has been treated with a sealant or stain. It's best to test the technique on a small area of the wood first to see how it reacts.