How to Angle Park

Angle parking is a method of parking your vehicle at an angle relative to the direction of the road. It is commonly used in parking lots and some streets to maximize parking space. Here are the steps to angle park properly:

1. Find an angle parking spot: Look for an angle parking spot that is open and big enough to accommodate your vehicle. Make sure there are no signs indicating that parking is prohibited.

2. Check for obstacles: Before entering the parking spot, check for any obstacles like curbs, poles, or other vehicles that may be in your way.

3. Signal your intentions: Use your turn signal to indicate to other drivers that you are planning to park.

4. Approach the parking spot: Approach the parking spot slowly and from an angle. Position your vehicle so that it is centered in the spot and parallel to the cars on either side.

5. Adjust your position: If necessary, adjust your position by pulling forward or backing up to ensure that you are parked squarely in the space.

6. Check your surroundings: Once you are parked, check your surroundings for any pedestrians or other hazards before opening your doors and exiting your vehicle.

7. Turn off your engine: Turn off your engine and remove the keys from the ignition.

8. Secure your vehicle: Make sure your vehicle is secure by engaging the parking brake and checking that it is in the correct gear if it is a manual transmission.

Remember to always be aware of your surroundings and be cautious when maneuvering your vehicle. With practice, you will become more comfortable with angle parking and be able to do it with ease.