Editing Openai/68713b82-90e0-8006-8973-ea152bf13a2c (section)

=== User: no lets fix the problems first : ===
no lets fix the problems first :) 
first we will make the gold as it is not porus just doesnt allow electrons to escape .. photons will get in anyway overtime it is basic geometry :) so the ammount of electrons inside should increase over time .. the idea is to overload the gold itself to combine with the lectrons .. we need to remove the air part not to loose so we will need to do inside gold wires lots of them in a mesh network overall the box to create more paths for the electrons to overload the gold .. 
this will remove the problem of air breakdown , also we need it vacumed as we wont need to open it ... 
the discharging will happen from the outside by touch and the PD ... 
enegry input is only the starting electrons and photons input accordin to the design of the box or cube or sphere .. so its motion will move the electrons and the photons will increase its charge and it will be discharged by touch .. 
it can be hang like on a spring for natural motion from vibrations .. :D 

revisit it and the calculations plz